|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Replaced the clutch and it's still giving me the dc code |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
10-11-2012, 02:50 PM
|
|||
|
|||
Replaced the clutch and it's still giving me the dc code
Model Number: Fav6800Aww Brand: Maytag Age: 5 - 10 years
My clutch was bad on my washer replaced it and its still giving me the dc code. What do I do now? Is there a certain way it needs to go on?
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
11-29-2012, 01:12 PM
|
|||
|
|||
|
Clutch Installation
It is very easy to not engage all the drive lugs on the clutch drive to the 2 input shafts ( one square, the other one is a drive dog, slot type drive) and one housing lug. This is especially true if you are working on the unit while it is in the upright postion. I cut a 2x4 just the right length to support the tub at the front and cause it to angle back sightly so I can get my fat hands into the clutch area. I have found that if you hold to clutch in the installed position and have a helper rotate the drum and then the side paddles as you push up on the clutch with light pressure, the clutch is much easier to install and you can feel the clutch drive engage each "step" on the hub.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| replaced clutch/coupling now clicks when agitates | janbrown | Washer Repair | 1 | 09-04-2010 05:42 PM |
| Replaced clutch assembly; still won't spin | jhillman | Dishwasher Repair | 1 | 07-28-2010 08:37 PM |
| Whirlpool with a spin problem, clutch replaced. Hmm... | laser3kw | Washer Repair | 8 | 01-26-2010 01:32 AM |
| Replaced clutch--machine noisier | mustech | Washer Repair | 1 | 11-06-2009 10:45 AM |
| Whirlpool DuetHT GHW9400PW0 giving F11 code after a power outage - is my CCU fried? | antny | Washer Repair | 23 | 09-29-2008 06:01 AM |
Linear Mode
