|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Direct Drive motor new and just "hums" |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
10-07-2012, 08:56 PM
|
|||
|
|||
Direct Drive motor new and just "hums"
Model Number: ltg6234aw3 Brand: Whirlpool Age: More than 10 years
A seal gave out and leaked water inside all the working parts in my washer so I basically replaced everything.
When I got it back together the motor spun and was a little loud but then stopped and only hummed and dimmed the lights on the circuit I had it plugged into while testing. I then unhooked it from the transmission and tried and all it did was hum. Naturally I bought a new motor... same deal. Just a hum and it's getting hot. Any help? Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
10-09-2012, 01:57 PM
|
||||
|
||||
|
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
10-09-2012, 02:06 PM
|
|||
|
|||
|
Quote:
|
|
10-09-2012, 05:24 PM
|
||||
|
||||
|
You need to measure the capacitance using the multimeter.
It should be around 200 MF. Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
10-10-2012, 05:37 PM
|
||||
|
||||
|
Hi.
Check the wire harness and all the disconnect plugs (at the motor switch, timer and between). Check for broken wire at the motor plug. Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
10-11-2012, 06:08 AM
|
|||
|
|||
|
The timer contacts for start current may be blown open, amprobe would confirm. If the cover will come off the timer, just check for burnt contacts.
__________________
-
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Neptune MD5500 Washer:Error Codes "do" and "FL" with a triple beep and a buzzer sound | neptune123 | Washer Repair | 1 | 06-12-2011 04:14 PM |
| Kitchen Aide Ice Maker cause "snow" where ice should come out.Ice "Cubes" are crushed | lauriejb | Refrigerator & Freezer Repair | 0 | 05-29-2010 08:58 AM |
| oven "moaning" sound then faint "poof" sound; later, large "poof" popped door open | samej71 | Oven Repair (including Ranges and Cooktops) | 2 | 03-24-2010 07:05 AM |
| dryer only "hums" when power button is pushed, light on inside drum | mastersaint | Dryer Repair | 3 | 01-08-2009 11:25 AM |
| GE dryer "hums" but won't spin. | ocmike | Dryer Repair | 1 | 09-19-2008 09:19 AM |
Linear Mode
