Washer Repair

inlander · #1 (**permalink**) 09-16-2012, 02:45 PM

My Kenmore Heavy Duty Series 60 washer has a few problems, possibly all related. The tub tilts forward a little, causing the fill water to hit the side of the tub. Most of it goes in, but the leak on the floor that it has while filling could be attributed to that, no? Anyway, the other problem is that it knocks during spin, even when the load is well balanced. Please let me know if you think it has multiple problems or if they all point to the tilt in the tub as the source. And of course, what to do about the problem(s) would be appreciated! Thanks.

inlander · #2 (**permalink**) 09-16-2012, 02:48 PM

Full model number is 110.81664110.

Found some helpful info on the model number meaning (Kenmore only):
http://www.burnyourbonus.info/alt.ho...hread2649.html, in case someone is interested...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washer knocks on spin	jiminthekeys	Washer Repair	0	03-14-2012 04:07 PM
Whirlpool Washer knocks in every spin cycle regardless of how many clothes are in it	mteasley	Washer Repair	1	01-14-2012 04:16 PM
Washer knocks when engaging spin cycle	sparky4446	Washer Repair	1	01-10-2011 07:52 AM
washer knocks on spin cycle	mr_beavis_2000	Washer Repair	0	03-31-2008 11:45 AM
Kenmore knocks on spin cycle	BigDoofus	Washer Repair	1	01-14-2008 07:46 PM

Kenmore Washer tilts, knocks in spin, leaks

Washer Repair

My Kenmore Heavy Duty Series 60 washer has a few problems, possibly all related. The tub tilts forward a little,