Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Redic221  
#1 Posted : Thursday, September 13, 2012 7:57:58 PM(UTC)
Quote
Redic221

Rank: Member

Groups: Registered
Joined: 9/6/2012(UTC)
Posts: 2

Frigidare Model Lft7000eso. Original problem would not spin. cleaned pump trap, unit worked for about 2 months. Unit started not to spin again. Put unit in diagnostic mode and unit did spin. Got error code 48. Ordered lock assembly. I used wahser serveral times while waiting for lock. Unit wont do anything now Replaced lock assemby..no change . Unit powers on ,But when pressing start door does not lock and no functions Can not get it to go into diagnostic mode. checked all wiring connecdtors and wiring harness to lock assembly no problem found. Also checked voltage on control board. voltage is normal120Vac in12Volt out.

Any suggestions???
Thanks Mark
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Friday, September 14, 2012 11:10:54 AM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Based on your descriptions I suggest you to check the wire harness and connections. If that is OK - replace the control board.

If you need a part number check the model number again - it's not coming up.

Simon.
Redic221  
#3 Posted : Friday, September 14, 2012 8:00:36 PM(UTC)
Quote
Redic221

Rank: Member

Groups: Registered
Joined: 9/6/2012(UTC)
Posts: 2

Thanks Model number is LTF7000ESO sorry type error.
I checked continuity on the harness to the lock assembly and all wires measure correctly.
Simon / APP Team  
#4 Posted : Monday, September 17, 2012 8:43:44 AM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Here is your control board Part number: 137007000
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Kenmore Stacked combo washer wont start after heavy load :( 110.88752796 (Washer Repair)
by puppy10014 10/22/2021 9:23:07 AM(UTC)
my Kenmore Dishwasher wont start (Dishwasher Repair)
by Guest 6/14/2021 8:14:07 AM(UTC)
GE Cafe edition Dishwasher Wont start (Dishwasher Repair)
by Lorunner1213 10/1/2019 12:04:27 PM(UTC)
Washer wont start (Washer Repair)
by Bulldog21 8/9/2016 5:06:53 PM(UTC)
Whirlpool Duet Washer Wont Start (Oven Repair (including Ranges and Cooktops))
by PCARAMELJACK 8/7/2015 10:12:21 AM(UTC)
whirlpool duet front load washer wont start (Washer Repair)
by kitp 3/13/2015 11:05:40 AM(UTC)
Washer Wont Start (Washer Repair)
by joemin97 9/1/2014 9:02:40 AM(UTC)
dishwasher wont start (Dishwasher Repair)
by conniek 8/11/2014 11:00:30 AM(UTC)
whirlpool duet washer wont start (Washer Repair)
by princesswarriorblade 11/2/2013 5:56:09 PM(UTC)
Kitchen Aid Dishwasher Wont Start (Dishwasher Repair)
by knightshome 10/14/2013 9:32:14 AM(UTC)
GE Cafe Dishwasher wont start (Dishwasher Repair)
by tsmith7159 10/2/2013 4:45:39 PM(UTC)
Kenmore Elite Dishwasher wont start (Dishwasher Repair)
by jlewis2407 9/22/2013 3:54:19 PM(UTC)
Frigidaire Washer Wont Start (Washer Repair)
by archie43 8/26/2013 6:15:18 PM(UTC)
Dishwasher wont start (Dishwasher Repair)
by Temcoman 7/20/2013 6:45:35 PM(UTC)
Kitchenaid dIshwasher wont start (Dishwasher Repair)
by yudengaz 5/24/2013 9:48:01 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.