[giroiradam]

After the last rinse cycle, the final spin cycle intermittently works. I have to open the lid, and turn the tub clockwise until i feel it get some resistance. Even then, it's a gamble on whether or not it will spin. (or spin fast enough to get some of the water out of the clothes.) Any ideas are welcomed.

[Simon / APP Team]

Hi.

Assuming that washer agitates OK.

Remove the agitator and check the drive block, it looks like

this Part number: 389140

If it's not stripped, then most likely you need to replace the

clutch Part number: 285785

Use the video clip for the instructions.

Here are the breakdown diagrams and Replacement parts for Whirlpool GST9679PW1 AUTOMATIC WASHER | AppliancePartsPros.com

Thank you. Post the results.

Simon.

[giroiradam]

Thanks Simon. I'm going to do a little bit of troubleshooting this weekend. I'll let you know what I find.

[Simon / APP Team]

OK.

Good luck.

Simon.

[giroiradam]

Please click one of the Quick Reply icons in the posts above to activate Quick Reply.

[giroiradam]

Originally Posted by Simon / APP Team

OK.

Good luck.

Simon.

Unfortunately, the drive block was in good shape. So I guess now I'm left with troubleshooting the clutch, or do you suggest just replacing the clutch at this point. For replacement, do you have another handy video. The vid for the drive block replacement was exactly how a how-to video should be.

Thanks,
Adam

[Simon / APP Team]

Hi.

Just click on the clutch photo to get the video.

Simon.