[leonides]

When I start the washer, it start agitating before filling with water, and at the end of the spinning cycle the clothes are soak in water,
Any tips ?

[sidfink43]

The generic answer would be the control unit.

I cannot get your model number to come up as a legitimate machine, so please check it and re post if you need more info.

[leonides]

Originally Posted by sidfink43

The generic answer would be the control unit.

I cannot get your model number to come up as a legitimate machine, so please check it and re post if you need more info.

Hi, thanks for helping, the only two numbers i'd find are: WVWC6ESWW-WW, and CY1641488.
Let me know please.

[sidfink43]

I am sorry but those numbers do not come up either. If this is not a U. S. made or sold machine then I cannot help any more than what I said before.

[leonides]

Originally Posted by sidfink43

I am sorry but those numbers do not come up either. If this is not a U. S. made or sold machine then I cannot help any more than what I said before.

Well, thanks for your help, but it is a Maytag Centenial, bought at WallMart, and those are the # on the machine and in the Invoice,
thanks again
Pedro

[sidfink43]

Well darn. That may be a special model made for Wal-Mart which is not in the data base.

[MayTech]

maytag model numbers are typically on the top backside of the console, or right behind the lid when you open it (on the cabinet, you'll have to get down low to see it probably)> numbers on invoices are typically store stock #'s and are not much help to us.

But sounds to me like a stuck pressure switch. Possibly bad timer/control.