[MichaelMax]

Washer gives E57 error code. I replaced the spin control board in my frigidaire LAFW3577KW0 front load washer. Didn't solve the problem. So I purchased a multi-meter and checked the ohm reading on the 5 pins in the motor's electrical socket. Here are the readings:

1-2 5.7 ohms
1-3 5.7 ohms
2-3 5.7 ohms
4-5 118 ohms

No other connections give any readings on the meter.

What is this telling me about the motor?

The motor number is 134362500.

Thanks in advance.

Is this a brushless motor? Motor turns very smoothly and easily, and makes no noise whatsoever. No sounds of brushes. I noticed that the two red wires connected to pins 4 and 5 in the motor's connector are attached to a torroidal device beneath a cover plate over the end of the motor shaft.