[bbcutright]

My GE Profile top load is leaking water out of the left rear overflow tube starting on on fill cylce. It just drips. I can see water around the top edge of the tub where it clips to the drum also but just to the touch and it dont seem to be running down the side of the drum just out the overflow. the washer works fine except for this. It does not try to spin when agitating nor is there water leaking on the transmision or clutch in the center of the drum that I can see.

[sidfink43]

Blow out/clean out the tube going from the pressure switch to the tub and see if that fixes things.

[bbcutright]

Ive blown this out and cleaned everything out everything greasy dirty. The overflow valve seems to be old and starting to lose its flex. Also the tub rig has a seal on the inside of the ring that has turned yellow-sh brown and is starting to crumble when you touch it. Ive ordered the baffle but cant seem to find the seal for the tub ring. What is that called? Thanks for your help...

[sidfink43]

I am not sure which parts you are referring to, but it you use your model number you will be taken to exploded views of your machine and you can find the part from there.

[bbcutright]

Originally Posted by sidfink43

I am not sure which parts you are referring to, but it you use your model number you will be taken to exploded views of your machine and you can find the part from there.

Ive ordered the over flood gasket valve and the cover tub also, has to be ordered complete as you cant order the seal in it by itself. I'm hoping this stops the leaking. After cleaning everything it only leaks when it goes into spin and wash cycle when its on extra large fill. Thanks for your help. I will let you know if this fixes the leaking....

[sidfink43]

Ok, great, good luck