Washer Repair

andy65 · #1 (**permalink**) 03-29-2012, 02:18 PM

Washer was full of water and would spin slowly but would not drain. Lifted front of washer and kind of shook it thinking maybe an airlock and it took off and spun and drained perfectly. When it filled the next time it would not drain again. Took all of clothes out and most of water and it drained and spun fine again. Would this be the drain pump or possibly a belt? I changed the main belt last year when it wouldn't spin.

Gene · #2 (**permalink**) 03-29-2012, 03:51 PM

Possible there is a floating foreign object inside the drain hoses or between the tubs. Remove the drain hose between the tub and the pump and check the hose and outlets.

It is strongly recommended to replace both belts even if only one worn out. So it maybe a good idea to replace both belts at this time. It is very important to properly adjust the pump belt tension after installation. The instructions are attached.

- The belts kit Part number: AP4011179

Here are the breakdown diagrams and Replacement parts for Maytag LAT9206BAE WASHER-TOP LOADING | AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
maytag washer won't drain	joedylewski	Washer Repair	3	02-12-2012 09:21 AM
Maytag washer won't drain	jim.davis4000	Washer Repair	1	04-06-2011 06:09 PM
maytag washer doesn't always drain	cbyrd3	Washer Repair	2	06-09-2010 10:10 PM
Maytag Washer Doesn't Always Drain	RPaaren	Washer Repair	6	08-16-2008 11:51 AM
Maytag Washer won't drain	J Tillmanns	Washer Repair	1	10-07-2007 04:44 PM

Maytag washer won't drain

Washer Repair

Washer was full of water and would spin slowly but would not drain. Lifted front of washer and kind of