Washer Repair

TheGreens · #1 (**permalink**) 03-21-2012, 12:26 PM

I have a GE top load washer that will not pump water or spin. It will fill , wash and agitate but stops at the spin cycle. It will go through rinse cycle (if manually selected), but just will not pump the water out and spin.

Gene · #2 (**permalink**) 03-21-2012, 09:11 PM

Remove the front panel and check the lid switch (#388 on the diagram). You can cut off the wires from the lid switch and connect them together for the test only. Make sure that connection is insulated properly. Run the washer to see how it will work.

If it will drain and spin, replace the lid switch.

- The lid switch Part number: AP3968471

Here are the breakdown diagrams and Replacement parts for General Electric EWA5600G0WW Washer | AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
washer will pump water out but won't spin	karcar	Washer Repair	0	07-15-2010 09:43 AM
Won't pump out water or spin	jaypgrimes@myself.com	Washer Repair	1	01-18-2009 05:50 AM
Washes But Will Not Pump Out Water Or Spin	SHARON MARIE 79	Washer Repair	1	11-03-2008 08:47 AM
Washer will not pump out water in spin	Blue Bear	Washer Repair	0	07-24-2008 06:08 AM
Washer won't spin or pump water out	nikki afinowicz	Washer Repair	0	12-09-2007 07:41 AM

Will not pump water or spin

Washer Repair

I have a GE top load washer that will not pump water or spin. It will fill , wash and