[Chopper5150]

My washer seems to run okay. It fills at the beginning of the wash cycle, but when it gets through the first spin and then goes to fill back up for the rinse, it barely trickles out.

I appreciate any help you can provide me with.

[Gene]

How it will fill up if you select cold water for wash?

Gene.

[Chopper5150]

Originally Posted by Gene

How it will fill up if you select cold water for wash?

Gene.

Nice question. It does seem that the pressure for the cold water is less than half the pressure that it use to be and is much less than the hot water line.

[Gene]

Check the water pressure at the cold water outlet. If there is nothing wrong, replace the water inlet valve. If you need the correct part number for the water inlet valve, post the serial number of the washer.

Gene.

[Chopper5150]

I'll check it. Thanks for your help.

[Markram]

First check the cold water inlet valve screen located at the machine end of fill hose, it may be clogged. If it is clogged, clean it out well and then see if that works.

No need to replace the valve log if you don't need to.

This happens a lot on houses with well water.

Check both ends of fill hose... there may be a screen on faucet end also.

[Chopper5150]

Thanks for all the help. It was simply a clogged cold water inlet filter. You saved me a bunch of money for a repair.

THANKS !!

[Gene]

You are welcome. I'm glad it's up and running.

Gene.