Appliance Repair Forum

Appliance Repair Forum (
-   Washer Repair (
-   -   New Spin Belt Won't Roll on Wheel (

NathanS 03-03-2012 12:06 PM

New Spin Belt Won't Roll on Wheel
I ordered a new spin belt (27001007) for my washer (SAV5600AW). It seems to be too short. I made a "map" of how the belt fed around the pulley and motor before I pulled it off. Then I checked a few other sites for reference on how it feeds through before I put it on, but there's just not enough slack to roll the belt onto the wheel. I'm a big person, it's not for lack of strength. If I put the belt on first and then try to force the motor back onto the mounting (and I'm not exaggerating when I say force) I can't reattach the idle spring without it looking like I'll stretch it way too far. Any suggestions?

Thank you!

sidfink43 03-05-2012 05:51 PM

It is not difficult to put on the belt, so either you don't have it on correctly or more likely, you were sold the wrong belt.

All times are GMT -7. The time now is 04:57 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17