Washer Repair

IllustrationAlley · #1 (**permalink**) 07-31-2009, 09:19 AM

Hi!
The Timer knob control spindle snapped on our whirlppol washing machine. Whilst removing the spindle from the thread the timer control calibration has slipped by 180 degrees in a clockwise direction. Was wondering if anybody could tell me how to reset this.
Thanks!
Steve

richappy · #2 (**permalink**) 07-31-2009, 09:38 AM

Take the cover off the timer and turn the cam by hand to an off position. This position will cause no washer action. Put the spindle and knob back on correctly till it indicates an off position. Now turn the knob, each of the three off positions should alighn up, if not, try again by turning the cam to the next off position.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oven Calibration	squier3	Oven Repair (including Ranges and Cooktops)	1	02-03-2010 03:51 AM
Whirlpool Range - Cannot reset time display after power outage	tgerstacker	Oven Repair (including Ranges and Cooktops)	0	09-29-2008 09:45 AM
Whirlpool Trash Masher Reset Button?	jsd	Trash Compactor Repair	0	12-01-2007 11:07 AM
need help to reset Caloric oven timer	marie33sports	Oven Repair (including Ranges and Cooktops)	0	11-21-2007 08:49 AM
Oven calibration	CHARLES EALLONARDO	Oven Repair (including Ranges and Cooktops)	0	09-06-2007 06:29 PM

Whirlpool Timer Calibration reset

Washer Repair

Hi! The Timer knob control spindle snapped on our whirlppol washing machine. Whilst removing the spindle from the thread the