Discuss

Whirlpool washer agitator won't turn during wash cycle.

 in

Washer Repair

. "

Washer agitator doesn't turn during wash cycle unless I manually apply downward pressure then it does it's "jerky thing" until

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Washer Repair » Whirlpool washer agitator won't turn during wash cycle.

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 07-29-2009, 09:16 AM
Junior Member
 
Join Date: Jul 2009
Posts: 3
Bill Armstrong is on a distinguished road
Default Whirlpool washer agitator won't turn during wash cycle.
Brand: Whirlpool   Age: More than 10 years   

Appliance Parts from AppliancePartPros.com


Washer agitator doesn't turn during wash cycle unless I manually apply downward pressure then it does it's "jerky thing" until I release pressure. Is there a loose bolt or broken gear? How do I open this up to look?

Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
  #2 (permalink)  
Old 07-29-2009, 09:37 AM
Senior Expert
APP Volunteer
 
Join Date: Sep 2007
Location: State College, Pa.
Posts: 9,586
richappy is a name known to all
Default

Post model #, this is probably a very old washer with a bad tranny, but post anyway.
__________________
-
Reply With Quote
  #3 (permalink)  
Old 07-29-2009, 03:29 PM
Junior Member
 
Join Date: Jul 2009
Posts: 3
Bill Armstrong is on a distinguished road
Default

Quote:
Originally Posted by richappy View Post
Post model #, this is probably a very old washer with a bad tranny, but post anyway.
The lsq9244eqo Whirlpool apparently has broken agitator dogs. I had to figure out how to take the thing apart and once I did I found the broken dogs. Odered them today Thanks anyway... Bill
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Whirlpool Ultimate Care II Washer won't Rinse after Wash Cycle missfixit Washer Repair 22 07-30-2013 01:55 PM
Whirlpool washer will not finish wash cycle rcubed Washer Repair 8 12-01-2009 05:53 PM
Whirlpool Washer Stuck in Wash Cycle dansmith60 Washer Repair 1 10-25-2009 07:36 AM
defective cycle control knob won't push in; need to grasp & turn wash cycle dial. lewisj Washer Repair 1 11-10-2008 11:03 AM
Whirlpool washer squealing at start of wash cycle gandecoe Washer Repair 0 07-29-2008 02:39 PM



All times are GMT -7. The time now is 11:41 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17