|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Steve.JAS |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
07-23-2009, 05:29 PM
|
|||
|
|||
Steve.JAS
Model Number: ALW480DAW Brand: Amana Age: 5 - 10 years
I have disassembled the washer to replace the main bearing and Agitator Bell Seal. I have the lubricant for the Bell Drive Seal, what type lubricant should be used on the Transmission Shaft before reassembly?
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
07-26-2009, 06:46 AM
|
|||
|
|||
|
Hi Steve
Look on page 29 of the service manual to see if that does not answer your question. http://www.servicematters.com/maytag...S3100007R0.pdf Good luck, sounds like you are doing what is a hard job very well.
__________________
-
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| steve | chevyduece | Dryer Repair | 0 | 10-13-2009 06:36 PM |
| steve | chevyduece | Dryer Repair | 1 | 10-13-2009 04:45 PM |
| Steve W | swal779725 | Washer Repair | 1 | 04-08-2009 04:40 PM |
| Steve | Steve Douma | Refrigerator & Freezer Repair | 3 | 03-26-2009 03:07 PM |
| Steve | compass69 | Oven Repair (including Ranges and Cooktops) | 1 | 08-04-2007 10:32 PM |
Linear Mode
