|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Cinch Nut on Maytag Pedestal |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-02-2012, 09:26 AM
|
|||
|
|||
Cinch Nut on Maytag Pedestal
Model Number: MAH6700AWW Brand: Maytag Age: 5 - 10 years
Cinch nut on one leg is loose. Causes the leg to be loose and unable to be locked.
Anyone know if it's possible to repair the cinch nut so that it locks again? Pedestal and washer are way out of warranty so replacement of the pedestal, as indicated in Maytag tech bulletin TDL-0092C-B is not an option. Thanks in advance for any advice. Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
02-02-2012, 04:40 PM
|
|||
|
|||
|
I ended up adding another nut and lock washer above the cinch nut and a lock washer just above the foot of the leg. Fortunately, the current placement allowed for having enough of the leg bolt sticking up above the cinch nut to accomplish this. Fingers crossed it will hold ok.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Maytag CA206 and Maytag CA207 | wnlewis | Washer Repair | 0 | 08-31-2010 07:26 PM |
Linear Mode
