|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Cold water fills very slow |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
07-13-2009, 12:18 PM
|
|||
|
|||
Cold water fills very slow
Model Number: LSR8233EQ0 Brand: Whirlpool Age: More than 10 years
I have a problem when cold water fills the tub,seems to take forever.
Hot water fills normal but on rince when only cold fills it's very slow. Is it water inlet valve even though hot works properly? Or is it something else Thanks Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
07-13-2009, 03:58 PM
|
|||
|
|||
|
Yes, it can be the inlet valve but check the strainers (they may be clogged) in the fill hoses and make sure you have good water pressure. Then if you don’t see a problem there replace the inlet valve. Washer Repair Guide
Last edited by applianceman : 07-13-2009 at 04:00 PM.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| washer fills very slow, rinse cycle | jrurig | Washer Repair | 1 | 01-14-2010 04:47 PM |
| Icemaker Slow, Water very slow | rip14 | Refrigerator & Freezer Repair | 1 | 06-30-2009 06:19 PM |
| washer fills slow when it goes into rinse cycle | myparrot | Washer Repair | 1 | 10-15-2008 11:15 AM |
| Cold Water Delivery is Slow! | Randy Wynn | Washer Repair | 1 | 09-30-2008 10:27 AM |
| Slow cold water fill | skirven2 | Washer Repair | 1 | 04-25-2008 10:17 PM |
Linear Mode
