Rank: Member
Groups: Registered
Joined: 7/11/2009(UTC) Posts: 1
|
Hi Folks,
I have a Maytag washer Model # pav2300aww that wont drain properly. When it gets to the end of the wash cycle the soapy water wont drain unless I open and close the lid repeatedly. It will then drain a little then stop until I open and close the lid. I can drain it by opening and closing the lid or pushing down the lid switch manually repeatedly. It also doesn't drain after the rinse cycle. I have to do the same stop and start thing to drain it then. I will appreciate any help you might have. Thanks Dick
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Well, I would start by replacing the lid switch.
If that does not fix it, post again and let's see what else you might have.
Good luck
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close