|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » When wash is complete the machine stay on agitate and won't allow a new wash cycle |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
07-06-2009, 10:16 PM
|
|||
|
|||
When wash is complete the machine stay on agitate and won't allow a new wash cycle
Model Number: LSC8244EZI Brand: Whirlpool Age: More than 10 years
Upon completion of wash cycle, the machine goes to agitate and sometimes does perform second rinse. I have replaced the timer and water level select switch and still have the problem. I have to let the machine sit for 4 or 5 hours before it will start working again.
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
07-07-2009, 01:34 PM
|
|||
|
|||
|
Does it agitate and spin at the same time? If not, I would remove the pump and motor and turn the tranny coupler both ways for spin or agitate. Is it hard to turn once the tranny engages spin or agitate?
POST RESULTS
__________________
-
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wash Cycle stops/won't complete | cxj | Washer Repair | 2 | 05-03-2011 01:30 PM |
| Wash machine starts on different segment of wash cycle than what we set it to | rbarnes18 | Washer Repair | 1 | 01-01-2010 07:03 AM |
| Spins, Rinse, But Does Not Agitate in Wash Cycle | mdmmis6 | Washer Repair | 3 | 12-01-2009 03:58 AM |
| washer does not agitate when in wash cycle | JenCham | Washer Repair | 1 | 08-08-2009 01:56 PM |
| Dishes still wet after running complete wash cycle | FDAR | Dishwasher Repair | 2 | 01-07-2009 06:42 AM |
Linear Mode
