Rank: Member
Groups: Registered
Joined: 6/29/2009(UTC) Posts: 2
|
We just moved and connected our washer, when we started the wash cyclce the water goes into the tub and keeps going out the drain hose.
Any info will be apreciated, thank you.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
You have created a siphon, probably by placing the drain hose into the drain lower than than the tub of the washer, or by creating an airtight connection there.
Raising the hose and/or breaking the air tight siphon should solve this.
Good luck, let us know if that works.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/29/2009(UTC) Posts: 2
|
Thank you for all your help.
I had the hose gooing into a low drain, when I elevated it everything was fine.
Never had this happen before and it just freaked me out, I'm just really glad it was something dumb and simple to remedy.
Again, Thank you very much for your help.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Glad it worked out, and thanks for updating us.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close