|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » new motor coupling doesn't seem to fit |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-29-2007, 08:24 AM
|
|||
|
|||
new motor coupling doesn't seem to fit
Model Number: 110.20722990 Brand: Kenmore Age: 1 - 5 years
The new design of the motor coupler has a metal sleeve on the triangular pieces. There seems to be something designed in the metal sleeve that keeps the new part from mounting all the way onto the hub. It goes about halfway onto the sleeve, but won't go further. Is this how it is supposed to fit now - or do I have a defective replacement ?
    
|
|
12-29-2007, 08:33 AM
|
|||
|
|||
|
i use a3/8 socket extension +tap coupler with hammer till flush with shaft ,some tech apply a little grease in coupler
__________________
-
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Whirlpool Direct Drive - reasons for drive coupling failing | FriarTuck | Washer Repair | 1 | 11-12-2007 01:34 PM |
| Stuck agitator coupling | csol147462 | Washer Repair | 0 | 11-05-2007 05:47 PM |
| coupling help | smm111 | Dishwasher Repair | 1 | 10-04-2007 01:26 PM |
| Motor Coupling Removal | steved | Washer Repair | 2 | 09-29-2007 03:19 AM |
| icemaker motor | jeff hart | Washer Repair | 0 | 08-14-2007 06:45 PM |
Linear Mode
