Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
carrieg  
#1 Posted : Sunday, December 11, 2011 8:40:33 AM(UTC)
Quote
carrieg

Rank: Member

Groups: Registered
Joined: 8/26/2010(UTC)
Posts: 11

The appliance is slapping around like it has come loose from something internally. Do you have an idea what it could be. I was unable to pull this model number up on site....probably due to the age which is over 15years old.

Model number 12858100
serial 4505566

email: edwardcjustin@gmail.com
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Sunday, December 11, 2011 8:44:43 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Put 110 in front of the number and you get a standard Whirlpool washer.
If the tub is leaning forward, the spring in the back has rusted off the frame. If ok, remove outer panel and check the suspension Skate plate under the tub, might be off on one side.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.