[masker112]

discharge hose repl acemnt , machine to standpipe

[sidfink43]

Hi

Can you describe in more detail what the problem is and what you want to do?

Thanks

[masker112]

Have obtained new drain hose for back of washer to drain pipe(previous one was leaking). Looking for instruction on what is necessary to connect new hose to washer.

[sidfink43]

Well, normally with these machines the hose is clamped onto a short extended pipe at the lower left back. However, if your model has the hose connected inside the cabinet you will have take off the cabinet.

To do so, take out the two screws holding the console to the cabinet and flip the cabinet back. Then disconnect the lid switch plastic coupling and use a screwdriver to pop out the two brass looking clips. Open the lid and pull forward and the cabinet will tilt off towards you.

Good luck, and let us know if you have any problems.