Washer Repair

joshgeiger15 · #1 (**permalink**) 11-13-2011, 11:42 PM

Last week as the washer was running my son turned the timer knob while itwas still pulled out and running. This made the washer pop it's breaker. After Ireset the breaker it finished its' cycle just fine. I went to do a load a fewdays later and now it will not fill with water. If I move the knob over it willrun the rest of the cycle. Just will not fill up with any water. no hot nocold, I made sure the water was still on, and that the lines were not clogged. please help......

sidfink43 · #2 (**permalink**) 11-16-2011, 06:33 PM

This is really messed up as it should not start until it is filled with water so it can be the water level switch or the timer/control unit. You might have to replace each one, one at a time to find out.

If you need more info please post a model number so we can see what machine you have.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenmore low water fill	aust1648	Dishwasher Repair	2	03-07-2011 04:49 AM
Kenmore icemaker won't fill with water	bpamerick1	Refrigerator & Freezer Repair	0	02-04-2011 02:41 PM
Kenmore dishwasher water fill problems	bmanapp	Dishwasher Repair	1	09-13-2010 03:26 AM
Need to trigger water to fill Kenmore SS Icemaker	WMichelleL	Refrigerator & Freezer Repair	0	07-20-2009 11:52 AM
Kenmore Elite won't fill with water	packersphan	Dishwasher Repair	11	04-04-2009 06:23 PM

Kenmore 500 will not fill with water.

Washer Repair

Last week as the washer was running my son turned the timer knob while itwas still pulled out and running.