[Damsal in Distress]

I've been on this site reading for days and still have a problem.

My door latch has broken off a small piece of plastic on the door lock assembly. I'm getting an error code E41, which refers me to 'test 7' according to the Electrolux Service Manual.

Test 7 says to remove the assembly and test the PTC.
I've taken it apart, but do not know what the PTC is?

I bought an analog multimeter and want to test to make sure that is the problem and not the control board, but don't know what to test.

I also wanted to know if anyone had a link/download with the wiring diagrams, because getting to mine would be very difficult. The dryer is stacked on the washer and I have no one to help me move the dryer so I can open up the washer and retrieve my wiring diagrams.

Is it likely that I just need a new door lock assembly?
This unit is literally a few days past the 12 month warranty.
Thanks in advance for all replies.

[sidfink43]

Hi Damsal

Here is a Frigidaire site that has parts diagrams, wiring diagrams etc.

http://www.frigidaire.com/manuals.aspx

And here is a site where you can purchase the service manual.

Frigidaire Affinity Washer Repair Manual - by Electrolux

That just leaves us with the meaning of PTC.

I don't know.

Let's see if someone else doesn't post to tell us.

Good luck and let us know how it turns out. I am going to vote for the replacing the door lock assembly as the likely fix.