|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » having trouble getting into test mode |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-14-2007, 11:57 PM
|
|||
|
|||
having trouble getting into test mode
Model Number: wbvh6240fww Brand: GE Age: 1 - 5 years
The boot seal ripped and some water got into the door lock. I opened it up and found a spot which showed a small arc.
When I try to get into the test mode the washer beeps twice and nothing shows up on the screen. when I turn the dial it shows the cycle time with a decimal point and the buttons do nothing. Any I missing something? Also when I plug it in the pump runs. I've cleanded the filter. I'v messed with it some more. The pump doesn't run any more. When I press start the time counts down in min & sec. It doen't fill, spin or anything. Is there any tests to do on the board? Last edited by wagk : 12-16-2007 at 11:30 PM.     
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Test | rjnichols | Microwave Repair | 1 | 12-10-2007 06:46 PM |
| Touch Panel Trouble | harnepe | Dishwasher Repair | 0 | 11-21-2007 10:25 PM |
| ice maker trouble | mike3278 | Refrigerator & Freezer Repair | 0 | 11-07-2007 08:57 PM |
| Washer Trouble | mwjjk | Washer Repair | 0 | 11-06-2007 06:31 PM |
| How do you test if pump is bad? | dsell | Washer Repair | 4 | 09-18-2007 08:49 AM |
Linear Mode
