Washer Repair

cincibill · #1 (**permalink**) 12-11-2007, 05:51 PM

When the machine is filling with water, some of the water is not going into the tub because it is off center. This results in a puddle of water on the floor. A spring was laying under the machine, which we placed back on the machine, but water is still going onto the floor. Could that spring need to be replaced?

Gene · #2 (**permalink**) 12-11-2007, 07:14 PM

In order to provide the most accurate advise I need the complete model number of the washer.

Gene.

cincibill · #3 (**permalink**) 12-12-2007, 06:35 PM

Gene,

Model No. is 110.92281100 and is about 15 years old.

Gene · #4 (**permalink**) 12-12-2007, 07:48 PM

Check the base plate and the tub support for any damages.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Out of Balance	nahc49wu	Washer Repair	0	11-19-2009 09:27 PM
Out of Balance?	mom2akj	Washer Repair	1	06-02-2009 01:34 PM
Door broken - spring balance or door balance link	Lisa Keyko	Dishwasher Repair	2	03-14-2009 07:35 AM
Tub out of balance	bjdvorak@mwt.net	Washer Repair	0	05-09-2008 11:07 AM
off balance	vabshire	Washer Repair	3	04-21-2008 03:21 AM

Tub Off Balance

Washer Repair

When the machine is filling with water, some of the water is not going into the tub because it is