Washer Repair

bcanapp · #1 (**permalink**) 12-09-2007, 07:51 PM

My washer is leaving the clothes wet when finished, I noticed the door lock light was not on while operating, the wax motor for the door latch was not working, a voltage test indicated that 124 volts AC was at the wax motor while machine was in opporation. Installed new wax motor but did not correct problem.

Thanks,
bcanapp

ApplianceJunk · #2 (**permalink**) 12-09-2007, 09:08 PM

Hi,

Take a look at the R-11 resistor on the control board to see if it's burnt.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oven not working-Stovetop working	Jame	Oven Repair (including Ranges and Cooktops)	8	10-08-2008 10:08 AM
Possible Motor Problem???	Davejb	Dishwasher Repair	5	11-16-2007 02:53 PM
Dryer Motor Not Working	starr	Dryer Repair	3	10-20-2007 05:52 PM
motor pulley	dave curry	Washer Repair	1	10-17-2007 11:49 AM
Motor not working properly	W. Henderson	Washer Repair	0	08-14-2007 07:06 PM

Wax motor not working

Washer Repair

My washer is leaving the clothes wet when finished, I noticed the door lock light was not on while operating,