|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » good inlet valve but no water only agitate |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: wtw5500sqo Brand: Whirlpool Age: 1 - 5 years
when I start the washer it automaticaly start to agitate and no water comes in. The inlet valve has been checked and is good. How would I check the continuallity of current flowing from switch to switch?
Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
|||
|
The problem IS the water level switch!!!! TRY rotating it back and forth QUICKLY a few times.(Its stuck inside). If this dosent help, Replace the WATER LEVEL SWITCH!!!
__________________
- |
|
|||
|
I have very similar problem on GE wdsr2080d8ww
when I start the washer it automaticaly start to agitate and no water comes in... As per your post above... How do I check it is a water level switch? And how do I replace the water level switch? Last edited by jonlim1208 : 06-24-2009 at 09:32 PM. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| valve inlet for water and ice | zadian | Refrigerator & Freezer Repair | 4 | 03-16-2009 12:44 PM |
| Water Inlet Valve | chefinthecity | Refrigerator & Freezer Repair | 1 | 12-08-2008 12:41 PM |
| Water inlet valve | Woodbutcher | Washer Repair | 1 | 05-23-2008 07:53 PM |
| Water inlet valve | m/c | Refrigerator & Freezer Repair | 2 | 07-31-2007 11:34 PM |
| Water inlet valve | gentleben | Refrigerator & Freezer Repair | 1 | 07-19-2007 12:04 PM |