Rank: Member
Groups: Registered
Joined: 10/11/2011(UTC) Posts: 2
|
Whirlpool Cabrio,Everything seems to work fine when water starts to enter the machine its fine for 5 seconds then stops.The machine runs through its whole program,except no water other than the first 5 seconds when the washer starts.Controler or inlet valve?I checked the supply lines and filter screens all clear
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
You need to check the inlet valves for 110-120 v when they are supposed to be open. If they are not getting current then the control unit is suspect, if they are, then the valve assembly is suspect.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close