Rank: Member
Groups: Registered
Joined: 9/13/2011(UTC)
Posts: 2
|
Have a whirlpool washer model#wtw5700sw0 that when the water temperature is set on cold the water changes temperature mid fill to hot.
When it is set on cold it is not in the acu temp mode so the water should just fill cold. would this issue be the actual switch or possibly the water valve itself?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
I cannot tell if there is ATC control in the valve assembly, if so it is probably the problem.
If not the timer or the selection switch can be the problem.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/13/2011(UTC)
Posts: 2
|
Thank you so very much for your reply.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
