Washer Repair

ljdyo · #1 (**permalink**) 08-29-2011, 07:11 PM

the lid lock latches (the grey tab/latch pieces) were snapped off

by a worker - long story. the LH lock is not corroded & only the latch is broken. can I find this part anywhere, or do I need to by the whole LH lid lock? thanks!

dh1200s · #2 (**permalink**) 08-30-2011, 07:45 AM

Sorry to hear that I have done a lot of work on my FAV6800A and FAV9800A on this and other forums. You will need the whole L.H. lid lock. Save the assembly push/pull relay, magnetic reed switch and the case haves may come in handy. Watch out for breaking plastic latches on the case halves of that Lid Lock assembly.

Only the L.H. Lid lock is required for normal machine operation for owner/DIYrepair.

ljdyo · #3 (**permalink**) 08-30-2011, 08:15 AM

thanks so much. I figured I would need to buy the whole thing but thought it was worth a try. I have read all your posts on the Neptune - so informative!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frigidaire door lock assembly	frustratedmomma	Washer Repair	4	09-17-2011 08:35 PM
Door lock assembly replace?	Bob Watts	Washer Repair	2	11-09-2010 05:13 PM
Freezer Door Lock Assembly	Neuf	Refrigerator & Freezer Repair	0	01-23-2009 08:23 AM
Accessing the door lock assembly	jault	Washer Repair	1	11-05-2008 01:52 PM
Replace lock motor assembly	skippy	Oven Repair (including Ranges and Cooktops)	0	01-24-2008 09:04 AM

lid lock assembly

Washer Repair

the lid lock latches (the grey tab/latch pieces) were snapped off by a worker - long story. the LH lock