Washer Repair

bluejohn · #1 (**permalink**) 08-10-2011, 08:46 AM

My washer was reading out sud, then f35. I asked about this and was told by you folks that I needed a W10415587 water level switch. I ordered and received the switch and installed it. The unit now reads sud then f21, but never started to fill. The timer worked it's way down to 45 min and never started to fill. Before, if the timer got down to 48 min it would run through the cycle as normal. It would say sud and run through that cycle and at 49 min would read f35 or run normally. The part I was sent is a replacement for the origional and doesn't have metal contacts on the bottom where it plugs in. Where do I go from here?

thanks
john

bluejohn · #2 (**permalink**) 08-10-2011, 09:37 AM

Please ignore, I had the part installed improperly. My son installed it and it works

thanks
john

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whirlpool Duet Steam Washing Machine	sjmeyers	Washer Repair	0	07-09-2011 01:01 PM
whirlpool duet steam	wapiwulo	Refrigerator & Freezer Repair	1	05-24-2011 12:08 PM
whirlpool duet steam f20 error	jamh	Washer Repair	0	03-21-2011 06:52 PM
Whirlpool Duet Steam	giget2000	Dryer Repair	3	10-05-2009 10:08 AM
Whirlpool Duet Steam Washer Problem	john.d.frank	Washer Repair	3	08-24-2009 06:11 AM

whirlpool duet steam

Washer Repair

My washer was reading out sud, then f35. I asked about this and was told by you folks that I