Rank: Member
Groups: Registered
Joined: 7/12/2011(UTC) Posts: 6
|
i cleaned out my pump of my front load as it filled but never started. I cleaned out the water pump, but issue now is that tub will not fill. It starts filling for a few seconds then stops.:mad: I checked pressure sensor switch it shows that the circuit is open, i don't know if this is correct. I can blow on the line and hear the switch toggle, but i don't know why i can't get tub to fill. I also just replaced the shocks, don't know what that role it plays in this. I have moved the washer from original spot to work on it. Will the washer sense if it is on an unlevel surface?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/12/2011(UTC) Posts: 6
|
Follow up to pressure switch - it is ok.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close