|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » new belts still burn smell |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
03-09-2009, 11:22 AM
|
|||
|
|||
new belts still burn smell
Model Number: lat8826aae Brand: Maytag Age: More than 10 years
Disconnected belts no smell.ran on spin for 4minutes. New belts ,stronger smell but machine still runs. Both belt pulleys under motor very very hot to touch. Help
+ Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
03-09-2009, 04:19 PM
|
|||
|
|||
|
I would pull the front cover off and check under the tub foe dirty water marks. If so, you have a bad tub seal and bearing. Take the belts off and turn the tranny in the spin direction. If hard to turn, that confirms it. If no water marks, you might have some item stuck in the basket. Just remove the tub top and check.
__________________
-
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Washer stop cycle and smell as burn plastic | andresm | Washer Repair | 3 | 10-23-2009 06:59 PM |
| Whirlpool agitates, won't spin burn smell | SBMiller | Washer Repair | 1 | 12-18-2008 04:31 AM |
| How do you access the belts | albarber | Washer Repair | 11 | 10-20-2008 07:05 AM |
| belts | jkaishas | Washer Repair | 1 | 08-20-2008 09:17 AM |
| Stacked Washer/dryer Wont Spin/burn Smell | rustknee | Washer Repair | 2 | 03-10-2008 05:23 PM |
Linear Mode
