[coxcassie]

Front load washer doesn't complete the final spin cycle. Drains, but no spin. I have read on some threads that you can find an error code, how do I do that?

[sidfink43]

Inside the lower service panel is a set of tech notes that will tell you how to generate error codes. It should also show you how to test the speed/motor control board and the door lock assembly which may be your problem.

[coxcassie]

We took the lower panel off and there is nothing inside, only a warning sticker. We took the drainage pipe off and there was nothing but sewage smell. Is there any way to get the tech notes from another source?

[jdgriffith]

On my Frigidare front loader washer, I found all the information needed in an envelope attached to the inside wall behind the front kick plate...It had all the error tests to run as well as the error codes...Also, told me what to replace...It worked...Not quite a washer tech, but a lot more confident

[sidfink43]

If you still cannot find them, here is a link to the service manual

http://www.emaservicetips.com/pdfs/4...isWasherSM.pdf