Rank: Member
Groups: Registered
Joined: 2/15/2009(UTC)
Posts: 1
|
my washer is about 4 years old and after the wash filled with water it stopped and now all the clothes are in there, it is full of water and it will not turn on when i pull the knob out no matter where i put it. i checked the breaker box its fine but will not turn on and is full of water, someone please help
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
|
First, plug a lamp that you know is working into the outlet the machine is pligged into to test the outlet. You can drain most of the water by siphoning it out of the tub. If the outlet is good, you may have a dead motor or a bad timer. It could also be something simpler, like loose or disconnected wires in the console, a bad water level switch (does it fill and stop filling?), or a bad lid switch.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
