Washer Repair

nivek · #1 (**permalink**) 05-12-2011, 12:25 PM

washer won't finish cycle, soin or drain hold lid swith down it cliks then it will work sometimes, moved timer to spin or drain the timer makes a buzzing noise. so timer going bad or lid switch?

Gene · #2 (**permalink**) 05-12-2011, 02:46 PM

Open the control panel (the instructions are attached). Unplug the lid switch harness plug and using an insulated piece of wire bypass the lid switch.

Run the washer on spin/drain cycle.

If it will work, replace the lid switch.

- The lid switch Part number: AP3100003

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL LSQ9010KT0 WASHER | AppliancePartsPros.com

Gene.

nivek · #3 (**permalink**) 05-16-2011, 04:09 PM

gene thanks so much it works like a champ!!!

nivek · #4 (**permalink**) 05-16-2011, 04:10 PM

thanks gene works great!!!!!

Gene · #5 (**permalink**) 05-16-2011, 04:43 PM

You are welcome. I'm glad it's up and running.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dishwasher wont complete cycle	joelvan	Dishwasher Repair	0	05-09-2011 07:15 PM
wont complete cycle	theboyz	Dishwasher Repair	0	03-22-2011 10:24 AM
thermal fuse trips, wont complete cycle	kendunkelberger	Dishwasher Repair	1	11-23-2010 04:42 AM
Washer will not complete cycle	KeithVogt	Washer Repair	0	11-23-2009 08:50 AM
bosch dishwasher wont drain and complete cycle	wcknudsen	Dishwasher Repair	4	03-05-2009 01:59 PM

washer wont complete cycle

Washer Repair

washer won't finish cycle, soin or drain hold lid swith down it cliks then it will work sometimes, moved timer