Rank: Member
Groups: Registered
Joined: 4/18/2011(UTC) Posts: 2
|
Hello, I would like to start by saying thank, your website help me previously with a dryer that would not heat up. I purchased the parts from your company replaced it myself and it is running great.
Ok onto my new problem I have a GE model WDSR2080DAWW top loading washer that will not agitate, about 2 to 3 years ago the agitator coupling was replaced under a warranty. I believe it has failed again, with the agitator off the coupling spins freely, but if I lift the coupling up maybe a quarter of an inch the coupling grabs hold. I do not know if this is how it is supposed to work so any advise on this would be greatly appreciated.
Thank You
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/18/2011(UTC) Posts: 2
|
Ok I did some checking on the coupler, the base of the coupler was fine but as I looked in more more in the center I noticed that there were flat spots on the teeth. So looks like I just have to replace the coupler again.
Thanks All,
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close