Washer Repair

rhta8702 · #1 (**permalink**) 04-05-2011, 05:28 PM

My sister has a Whirlpool clothes washer like mine. Hers is 1 year older. The F2 code comes on. I checked the pump. Spotless. checked the pressure tube. Also clean. Tried replacing the pressure sensor. Made no difference. Machine works properly on 1st load, then next load (no matter how small-1 towel-) won't work. Sometimes can manage to get machine to work on Spin/Drain, sometimes not. Is this an Motor Control Unit problem? If not, any ideas on how to fix or what to look for?

sidfink43 · #2 (**permalink**) 04-06-2011, 06:30 PM

First check all the wiring from the pump to the CCU. Probably not the problem, but its a free fix.

I would then try replacing the pump. If that does not fix things, the CCU is next. Yes, I know this sounds like trying parts to see what fixes it, but that is what is being done with these units.

If you buy the parts from this site and they do not fix the problem you can return them, see the Returns Policy for details and conditions.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
washer problem	john womble	Washer Repair	0	01-20-2011 07:47 PM
How to fix washer simple looking problem with washer	Woltato	Washer Repair	1	09-20-2009 07:21 AM
Re: Washer Problem	herkyfred	Dryer Repair	1	05-18-2009 05:11 PM
Washer problem in LARGE load setting- timer problem?	jagtianis	Washer Repair	9	08-04-2008 02:49 AM
washer problem	sporyma26@aol.com	Dishwasher Repair	0	06-09-2008 12:43 PM

Is this a washer MCU problem?

Washer Repair

My sister has a Whirlpool clothes washer like mine. Hers is 1 year older. The F2 code comes on. I