Washer Repair

hitchg · #1 (**permalink**) 03-26-2011, 08:36 PM

We were given a used washer and they said the hot water was not shutting off when filling tub. If they shut the hot water after filling, the washer would finish the cycle fine. What might we be looking at to repair this washer?

Dadrocks40 · #2 (**permalink**) 03-27-2011, 08:23 PM

It's the valve that the water hoses are hooked onto in the back of the washer. the hot side contacts are burned out. easy to replace and not to expensive.

lindasolt · #3 (**permalink**) 01-15-2012, 03:00 PM

What is the part number, I seen this DC62-30314K for a valve but it does not say hot water valve. Is the DC62-30314K correct? This DC62-00142G is it is for cold water valve.

I found it here: http://www.********************************.com/part...&prst=&shdMod=

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Water does not shut off	bashful	Washer Repair	1	11-11-2010 06:02 PM
hot water won't shut off	tmojo	Washer Repair	1	07-08-2009 03:59 PM
Water level does not shut off/ and it fills with water & drains but does not agitate	dogwood100	Washer Repair	1	04-14-2009 05:20 PM
Hot water does not shut off	Johnkut	Washer Repair	0	11-17-2008 10:33 AM
Water won't shut off	fordleonard	Washer Repair	4	06-04-2008 07:56 PM

Hot Water won't shut off

Washer Repair

We were given a used washer and they said the hot water was not shutting off when filling tub. If