Discuss

Cabrio washer code "OL"

 in

Washer Repair

. "

My Cabrio washer keeps getting a "OL" code during the wash cycle, even when running without a load in it.

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Washer Repair » Cabrio washer code "OL"

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 03-23-2011, 10:22 AM
Junior Member
 
Join Date: Nov 2009
Posts: 11
drew85205 is on a distinguished road
Question Cabrio washer code "OL"
Model Number: WTW6600SB1   Brand: Whirlpool   Age: 1 - 5 years   

Appliance Parts from AppliancePartPros.com


My Cabrio washer keeps getting a "OL" code during the wash cycle, even when running without a load in it. Cant possibly be over loaded when it's empty, any info would be greatly appreciated.


Related Models
Whirlpool WTW6600SB1 AUTOMATIC WASHER
Whirlpool WTW6600SB2 AUTOMATIC WASHER
Whirlpool WTW6600SB3 AUTOMATIC WASHER
Whirlpool WTW6600SG0 AUTOMATIC WASHER
Whirlpool WTW6600SG1 AUTOMATIC WASHER
Whirlpool WTW6600SG2 AUTOMATIC WASHER
Whirlpool WTW6600SG3 AUTOMATIC WASHER
Whirlpool WTW6600SW0 AUTOMATIC WASHER
Whirlpool WTW6600SW1 AUTOMATIC WASHER
Whirlpool WTW6600SW2 AUTOMATIC WASHER
Whirlpool WTW6600SW3 AUTOMATIC WASHER
Whirlpool WTW6700TU1 AUTOMATIC WASHER
Whirlpool WTW6700TU2 AUTOMATIC WASHER
Whirlpool WTW6700TW0 AUTOMATIC WASHER
Whirlpool WTW6700TW1 AUTOMATIC WASHER
Whirlpool WTW6700TW2 AUTOMATIC WASHER
Whirlpool WTW6800WB1 AUTOMATIC WASHER
Whirlpool WTW6800WE1 RESIDENTIAL WASHER
Whirlpool WTW6800WL1 AUTOMATIC WASHER
Whirlpool WTW6800WU1 RESIDENTIAL WASHER
Whirlpool WTW6800WW1 AUTOMATIC WASHER
Whirlpool WTW7300XW0 AUTOMATIC WASHER
Whirlpool WTW7300XW1 AUTOMATIC WASHER
Whirlpool WTW7300XW2 AUTOMATIC WASHER
Whirlpool WTW7320YW0 WASHER
Whirlpool WTW7340XW0 AUTOMATIC WASHER
Whirlpool WTW7340XW1 AUTOMATIC WASHER
Whirlpool WTW7340XW2 AUTOMATIC WASHER
Whirlpool WTW7600XW0 AUTOMATIC WASHER
Whirlpool WTW7600XW1 AUTOMATIC WASHER
Whirlpool WTW7600XW2 AUTOMATIC WASHER
Whirlpool WTW7800XB0 AUTOMATIC WASHER
Whirlpool WTW7800XB1 AUTOMATIC WASHER
Whirlpool WTW7800XB2 AUTOMATIC WASHER
Whirlpool WTW7800XB3 AUTOMATIC WASHER
Whirlpool WTW7800XB4 AUTOMATIC WASHER
Whirlpool WTW7800XL0 AUTOMATIC WASHER
Whirlpool WTW7800XL1 AUTOMATIC WASHER
Whirlpool WTW7800XL2 AUTOMATIC WASHER
Whirlpool WTW7800XL3 AUTOMATIC WASHER
Whirlpool WTW7800XL4 AUTOMATIC WASHER
Whirlpool WTW7800XW0 AUTOMATIC WASHER
Whirlpool WTW7800XW1 AUTOMATIC WASHER
Whirlpool WTW7800XW2 AUTOMATIC WASHER
Whirlpool WTW7800XW3 AUTOMATIC WASHER
Whirlpool WTW7800XW4 AUTOMATIC WASHER
Whirlpool WTW7990XG0 AUTOMATIC WASHER
Whirlpool WTW7990XG1 AUTOMATIC WASHER
Whirlpool WTW8200YW0 AUTOMATIC WASHER
Whirlpool WTW8240YW0 AUTOMATIC WASHER
Whirlpool WTW8600YW0 AUTOMATIC WASHER
Whirlpool WTW8800YC0 WASHER
Whirlpool WTW8800YW0 WASHER
Bosch WTZ1170 
Bosch WTZ1210 
Roper WU0800B UNDERCOUNTER DISHWASHER
Roper WU0800XX0 Dishwasher
Roper WU0800XX1 UNDERCOUNTER DISHWASHER
Maytag WU100 DISHWASHER- UNDERCOUNTER
Maytag WU1000 DISHWASHER- UNDERCOUNTER
Roper WU1000X0 Dishwasher
Roper WU1000X1 Dishwasher
Roper WU1000X4 Dishwasher
Roper WU1000X5 Dishwasher
Roper WU1000X6 Dishwasher
Roper WU1000X7 Dishwasher
Roper WU1000X8 Dishwasher
Roper WU1000Y0 UNDERCOUNTER DISHWASHER
Roper WU1000Y1 UNDERCOUNTER DISHWASHER
Maytag WU1004 DISHWASHER- UNDERCOUNTER
Maytag WU1005 DISHWASHER- UNDERCOUNTER
Maytag WU101 DISHWASHER- UNDERCOUNTER
Maytag WU103 DISHWASHER- UNDERCOUNTER
Maytag WU104 DISHWASHER- UNDERCOUNTER
Maytag WU180 DISHWASHER- UNDERCOUNTER
Roper WU1800XX0 Dishwasher
Frigidaire WU180T1BLACK Wwh(v5) / 18 " Dishwasher
Frigidaire WU180TF1 Wwh(v3) / 18 " Dishwasher
Frigidaire WU180TH1 Wwh(v2) / 18 " Dishwasher
Frigidaire WU180TR1 Wwh(v1) / 18 " Dishwasher
Frigidaire WU180TV1 Wwh(v4) / 18 " Dishwasher
Frigidaire WU180TW1 Wwh(v6) / 18 " Dishwasher
Maytag WU181 DISHWASHER- UNDERCOUNTER
Maytag WU200 DISHWASHER- UNDERCOUNTER
Maytag WU201 DISHWASHER- UNDERCOUNTER
Maytag WU202 DISHWASHER- UNDERCOUNTER
Maytag WU203 DISHWASHER- UNDERCOUNTER
Maytag WU204 DISHWASHER- UNDERCOUNTER
Maytag WU282 DISHWASHER- UNDERCOUNTER
Maytag WU284 DISHWASHER- UNDERCOUNTER
Maytag WU285 DISHWASHER- UNDERCOUNTER
Maytag WU300 DISHWASHER- UNDERCOUNTER
Roper WU3000V0 Dishwasher
Roper WU3000V1 Dishwasher
Roper WU3000V2 Dishwasher
Roper WU3000V3 Dishwasher
Roper WU3000X0 Dishwasher
Roper WU3000X1 Dishwasher
Roper WU3000X2 Dishwasher
Roper WU3000X3 Dishwasher
Roper WU3000X4 Dishwasher
Roper WU3000X5 Dishwasher
Roper WU3000X6 Dishwasher
Roper WU3000Y0 DISHWASHER
Roper WU3000Y1 UNDERCOUNTER DISHWASHER
Roper WU3006V0 Dishwasher
Roper WU3006V1 Dishwasher
Roper WU3006V2 Dishwasher
Roper WU3006V3 Dishwasher
Roper WU3006X0 Dishwasher
Roper WU3006X1 DISHWASHER
Roper WU3006X2 Dishwasher
Roper WU3006X3 Dishwasher
Roper WU3006X4 Dishwasher
Roper WU3006X5 Dishwasher
Roper WU3006X6 Dishwasher
Roper WU3006Y0 UNDERCOUNTER DISHWASHER
Roper WU3006Y1 UNDERCOUNTER DISHWASHER
Roper WU300X2 Dishwasher
Maytag WU301 DISHWASHER- UNDERCOUNTER
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
  #2 (permalink)  
Old 03-24-2011, 07:28 AM
Joe / APP Team's Avatar
Senior Expert
 
Join Date: Jul 2010
Posts: 5,010
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by drew85205 View Post
My Cabrio washer keeps getting a "OL" code during the wash cycle, even when running without a load in it. Cant possibly be over loaded when it's empty, any info would be greatly appreciated.

Drew,

Your "OL" codes, with the tub empty, indicates, that there's a problem in the drive/ tub system or the fill level.

A couple of easy checks,

a) Remove the cap in the center of the wash plate, then remove the bolt and
plate, and check for clogs and debris under the plate.
b) Reach into the tub and grasp the top of the spin basket and lift up on the
tub, you should be able to lift the tub easily, and as much as 1/2 to 3/4 ",
without it "hanging" up.

Also, have you noticed any leaks under the washing machine, or a light chatterring noise, when the washer first attempts to agitate, or spin ?

Let us know what you find, and we can move on from there.



easily
__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
Reply With Quote
  #3 (permalink)  
Old 03-24-2011, 06:39 PM
Junior Member
 
Join Date: Nov 2009
Posts: 11
drew85205 is on a distinguished road
Default

No debris present, basket moves up and down. Error f51, unit wont even finish the self diagnostic or manual diagnostic check without going into overload. Do you think it needs the RPS kit? Also no leaks or chattering noises. It wont even go into agitate mode, but it spins and pumps out the water when I restart it on drain and spin mode.

Last edited by drew85205 : 03-24-2011 at 06:42 PM.
Reply With Quote
  #4 (permalink)  
Old 03-24-2011, 07:54 PM
Member
 
Join Date: Mar 2011
Posts: 31
jamh is on a distinguished road
Default

Do a visual on your stator and look for cracks. Sounds like you need to replace the stator assembly. The cabrio has had problems with this ol issue. Whirlpool has a rework kit for this, only if its under warranty.
Reply With Quote
  #5 (permalink)  
Old 03-24-2011, 11:17 PM
Junior Member
 
Join Date: Nov 2009
Posts: 11
drew85205 is on a distinguished road
Default

Are there any specific places on the stator I should look for cracks? Or any other areas/objects that may cause this OL problem? If I have to replace the stator do I need to replace the rotor or RPS also?
Reply With Quote
  #6 (permalink)  
Old 03-25-2011, 05:03 AM
Member
 
Join Date: Mar 2011
Posts: 31
jamh is on a distinguished road
Default

If you get the stator assembly it should come with the rps sensor.
Reply With Quote
  #7 (permalink)  
Old 03-25-2011, 07:30 AM
Joe / APP Team's Avatar
Senior Expert
 
Join Date: Jul 2010
Posts: 5,010
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by drew85205 View Post
Are there any specific places on the stator I should look for cracks? Or any other areas/objects that may cause this OL problem? If I have to replace the stator do I need to replace the rotor or RPS also?

Drew,

If you did not have a leak, I don't think you'll need a stator, until you remove it and check the input shaft and windings for corrosion, etc.

What I would reccomend is, the RPS kit.

Part number: AP4327312

Part number: AP4327312


(I think, thats what jamh is referring to).

Follow the instructions carefully, and make sure the sensor mounting plate is properly installed and not over torqued, and you'll be fine.

Good Luck,

__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
Reply With Quote
  #8 (permalink)  
Old 03-25-2011, 01:38 PM
Junior Member
 
Join Date: Nov 2009
Posts: 11
drew85205 is on a distinguished road
Default

Well I disassembled the rotor and stator, the stator is cracked. No corrosion on the shaft, everything is really clean, surprisingly. I ordered a stator and the kit, but I am wondering whats involved in replacing that wiring harness that comes in the kit. If you guys have anymore info or tricks that I should know about I would and appreciate it and all the info you've supplied me with so far. You have been very helpful

Thanks again
Drew
Reply With Quote
  #9 (permalink)  
Old 03-25-2011, 04:13 PM
Joe / APP Team's Avatar
Senior Expert
 
Join Date: Jul 2010
Posts: 5,010
Joe / APP Team is on a distinguished road
Default

Quote:
Originally Posted by drew85205 View Post
Well I disassembled the rotor and stator, the stator is cracked. No corrosion on the shaft, everything is really clean, surprisingly. I ordered a stator and the kit, but I am wondering whats involved in replacing that wiring harness that comes in the kit. If you guys have anymore info or tricks that I should know about I would and appreciate it and all the info you've supplied me with so far. You have been very helpful

Thanks again
Drew

Drew,

It'll be a breeze, as long as you follow the instructions that come with the kit, and re check the connections for tight fits before you test and "button up" the unit.

You'll have it figured out and working in no time.

__________________
Thanks for allowing AppliancePartsPros.com to assist you,

Joe M. APP TEAM



Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
Reply With Quote
  #10 (permalink)  
Old 03-29-2011, 10:50 PM
Junior Member
 
Join Date: Nov 2009
Posts: 11
drew85205 is on a distinguished road
Default No more "OL"

Received the parts tonight and installed everything, even though no directions where included it was child's play. Ran the self diagnostics and a full load with no problems.
Thanks for all the help.
Drew
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Whirlpool Cabrio "Long Drain" problem JeffreyF Washer Repair 23 04-17-2014 07:21 PM
Samsung Washer "OE" error code rfgriffin Washer Repair 4 09-20-2011 09:12 PM
Whirlpool Washer "FH" error code johnvb Washer Repair 0 11-21-2010 10:55 AM
neptune front load washer gives "LR" code on display panel jacapp30 Washer Repair 1 09-13-2010 06:11 PM
Cabrio keeps popping up with "oL" code, even when it's not CopaDave Washer Repair 1 11-24-2009 07:35 PM



All times are GMT -7. The time now is 03:23 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17