|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Help me get this machine apart! |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: LT5000XSN2 Brand: Whirlpool Age: More than 10 years
I can not get front panel off this machine. The clips between cover and front panel do not move. Any suggestions? i am trying to find why the machine is leaking water.
Ads By Google Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
|||
|
Try to run a puddy knife between the lid and front panel. Some washers release the front panel and it snaps back on.
|
|
||||
|
Hi.
Remove the transition panel between washer and dryer (2 screws). Remove two screws and brackets at the rear of the top one in each corner (5/16). Slide the top forward and lift. Disconnect the lid switch plug. Remove the 2 screws holding front panel. Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|