Rank: Member
Groups: Registered
Joined: 2/16/2011(UTC) Posts: 1
|
Water was leaking out of my Speed Queen AA4411W. I took off the panel and noticed water was being flung every where - was not a simple leaking hose or connection. I assume it is the drive bell seal. I ordered AP4 53766. I took apart my washer (had to get a flywheel puller from Autozone) and underneath the drive bell were two thick rubber washers, a metal spring, and a metal ring. Plus another rubber boot that is still on the lo The kit I received has 1 rubber boot, it does not match the old stuff at all. I called and now I am receiving ap2406132. There were no pics on the website so today I asked for one and got it. It is very similiar to my first order. Has this been redesigned? do I pull all the old rubber and metal boots, washers, rings and replace it with this one boot (plus the screw, o ring, and grease). PS - I found the attachments - please review against part numbers mentioned. Thanks AP4253766 DIYJeff attached the following image(s):
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close