Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
woodyguy  
#1 Posted : Tuesday, October 16, 2007 10:08:55 AM(UTC)
Quote
woodyguy

Rank: Member

Groups: Registered
Joined: 10/16/2007(UTC)
Posts: 2

Our Machine Will Fill But Will Not Do Anything Else. I Had To Dip Water Out By Hand....fun!!!!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Pegi  
#2 Posted : Tuesday, October 16, 2007 10:20:58 AM(UTC)
Quote
Pegi

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/3/2007(UTC)
Posts: 73

I would start by checking for a broken lid switch...or is the motor running?? If so check for a bad/broken/oil covered belt...
woodyguy  
#3 Posted : Tuesday, October 16, 2007 12:27:02 PM(UTC)
Quote
woodyguy

Rank: Member

Groups: Registered
Joined: 10/16/2007(UTC)
Posts: 2

Thanks, I checked the lid switch with an ohm meter. It is opening and closing okay. I removed the back cover, turned the machine on. The motor briefly started humming, I smelled something get hot and then the motor quite humming. The motor pulley and belt moved freely by hand. Where do I look now?
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Dirty clothes (Washer Repair)
by lucyfish 7/20/2008 2:24:44 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.