Rank: Member
Groups: Registered
Joined: 2/3/2011(UTC) Posts: 3
|
My original problem started when I would start a wash cycle. The machine would wash to a point where it sounded a chime several times and gave an error code F11. I would hit the pause button, then hit the start button. The machine would click at which time I jiggled the heavier gage pink wires on the Electronic Control. The machine would resume its wash cycle completely. I figured the problem was the Electronic Control and ordered one. The new control arrived I installed it and now I have a new problem! The machine will now add water, start to rotate for the wash cycle (about 6 minutes) then drains breifly (not all the way) and continues to rotate at wash speed. It will not add any more water! It will not spin out clothes! and it will not end the cycle! It just keeps rotating! I know this is a long explanation, but I thought it would help to troubleshoot!
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/3/2011(UTC) Posts: 55
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/3/2011(UTC) Posts: 3
|
This is a Kitchenaid Model Number KHWS01PWH0. I had already replaced the door latch switch earlier, but still have the same problem. As an additional note: I can perform a satisfactory diagnostic test. It will complete the test every time with no faults. Originally Posted by: RoboJoe Industries
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close