Washer Repair

Edward Loeb · #1 (**permalink**) 02-01-2011, 09:45 AM

HI guys,this washer makes a loud winning sound like a bearing goinng bad,it only happens on the end spin cycle,the faster the spin the louder the sound gets,,what could this be from n it is a top load machine,thx ED

sidfink43 · #2 (**permalink**) 02-01-2011, 06:00 PM

Hi Ed

It can be several things so you are just going to have to open it up and see if there is a problem in the support structure or the pumps or something else.

Here is a link to a service manual for this Whirlpool made machine.

https://secured.whirlpool.com/Servic...LE/8178582.pdf

Edward Loeb · #3 (**permalink**) 02-02-2011, 04:35 AM

is it possiable it is the bearing in the outter tub,I already replaced the drain pump n the outter tub support mounts n when I hand spin the inner tub by hand I hear the noise?

sidfink43 · #4 (**permalink**) 02-02-2011, 07:30 AM

That sounds like a very good possibility. The problem with noises like you have is that we have to be there to hear the type of sound and its location. It seems that you are on the right track.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Loud noise during spin cycle	tbirdlover	Washer Repair	8	01-19-2011 12:22 PM
Loud noise on spin cycle	ezeeric11	Washer Repair	0	03-06-2010 04:17 AM
Loud noise on spin cycle	imref1	Washer Repair	1	10-28-2009 12:07 PM
Loud noise no spin cycle	nitro7575	Washer Repair	5	03-09-2009 01:22 PM
loud noise when in spin cycle	rzbackfan	Washer Repair	2	05-23-2008 03:24 AM

loud noise on spin cycle,the faster the spin gets the louder the winnig gets

Washer Repair

HI guys,this washer makes a loud winning sound like a bearing goinng bad,it only happens on the end spin cycle,the