Washer Repair

joenrae · #1 (**permalink**) 12-27-2010, 08:35 AM

Hi , I have a Fisher & Paykel GWL11 washing Machine . The drain pump only ran for a few second in the rinse cycle. Then I smell burning. I repeat this item several time and I heard a pop occured. Now there is no power on the unit at all .
I did remove the pump, there was no debri at all and seem to run freely.
Can you confirm that I need a new pump? Also is there a fuse somewhere that I can replace. I believe that was the popping sound I heard when the pump stopped running???
Thanks for your help I need to get this washer up and running as soon as I can with a family of Five.
Thanks!

RODDIE COOK · #2 (**permalink**) 01-07-2011, 06:49 AM

the pop was the controller dying now you must replace both the pump and the controller its happened to me about 94 times now so get ready to fork out some dough, btw next time make sure the customer doesnt keep trying to re-start the machine if theres a burning smell

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washing machine will not spin during rinse cycle	crookster	Washer Repair	4	04-11-2012 08:09 PM
washing machine won't rinse	dino062959	Washer Repair	1	02-15-2010 09:39 AM
Washing Machine won't go through rinse cycle	rlaverne38	Washer Repair	2	03-26-2009 03:27 PM
BOSCH DW door opened in rinse cycle stopped working	marksapp12	Dishwasher Repair	1	12-03-2008 04:08 PM
Maytag Washing Machine stopped working	tlay25	Washer Repair	1	10-16-2008 01:28 PM

Washing machine stopped working at the rinse cycle

Washer Repair

Hi , I have a Fisher &amp; Paykel GWL11 washing Machine . The drain pump only ran for a few

Hi , I have a Fisher & Paykel GWL11 washing Machine . The drain pump only ran for a few