Washer Repair

rcraighead · #1 (**permalink**) 12-11-2010, 08:35 AM

I recently replaced the belt on my Amana washer (it was really bad). The new belt has the right number (bought at this site), but seems too loose. I can see the motor spin, but the belt does not. The idler arm appears to be engaged properly and the spring is in place. Is there some other way to tighten the belt?

sidfink43 · #2 (**permalink**) 12-13-2010, 06:41 PM

The belt is loose as it serves as a clutch. I can only suggest you check to see that it is installed correctly through the water pump.

rcraighead · #3 (**permalink**) 12-13-2010, 07:02 PM

Quote:

Originally Posted by sidfink43

The belt is loose as it serves as a clutch. I can only suggest you check to see that it is installed correctly through the water pump.

Thanks for responding. Yes, it is installed correctly; goes through water pump and around inside of idler pully. I find stretching the spring slightly by extending the "hook" point, causes the spin cycle to work. I've ordered a new spring. There were 2 spring choices, one was shorter so I went with it. I hope it will resolve the problem perminantly.

sidfink43 · #4 (**permalink**) 12-14-2010, 06:10 AM

I hope so too, let us know how it works out.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacement belt too loose on hotpoint dryer	dbiggins	Dryer Repair	3	06-10-2011 02:17 PM
dryer belt is too loose	taushabrady	Dryer Repair	0	07-16-2010 03:06 PM
Loose belt	rbsailing	Washer Repair	2	12-12-2009 02:33 AM
Loose belt ?	den	Washer Repair	0	09-30-2008 01:10 PM
GE washer wont spin belt appears loose	parkman009	Washer Repair	2	06-18-2008 11:13 PM

New washer belt seems too loose.

Washer Repair

I recently replaced the belt on my Amana washer (it was really bad). The new belt has the right number