Washer Repair

myownee · #1 (**permalink**) 11-27-2010, 09:14 PM

I see there are many agitator drives here where the dogs have become brittle with age and broken. I have ordered the repair kit for this model, and I have disassembled the agitator assembly. Before removing the bolt and all the remaining broken pieces of the dogs, I noticed the mover agit moves up and down considerably, even far enough for the catch gear on the inside of the mover agit to clear the dogs. I noticed when I further disassembled that the washer AP3094463 is worn very thin. Will installation of the kit correct the up and down play or do I also have another worn part in need of replacement?
Thanks

sidfink43 · #2 (**permalink**) 11-29-2010, 05:10 PM

Once you install the dogs and put the 7/16" bolt back in place it should be fine, but if not let us know.

myownee · #3 (**permalink**) 11-29-2010, 06:53 PM

Quote:

Originally Posted by sidfink43

Once you install the dogs and put the 7/16" bolt back in place it should be fine, but if not let us know.

I installed the kit and it works great now, thanks sidfink43

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing agitator belt	jayreaser	Washer Repair	0	08-10-2010 05:17 AM
Installing an agitator	eliszt	Washer Repair	5	09-08-2009 09:08 AM
Installing bosch Circulation pump repair kit w/impeller & seal	andy G F	Dishwasher Repair	0	05-23-2009 06:17 PM
maytag wont spin after installing a Mounting stem repair kit	grouse	Washer Repair	1	10-07-2008 02:55 AM
Installing an agitator based fabric softener	jjones5050	Dishwasher Repair	2	02-14-2008 01:44 PM

Installing agitator dog repair kit

Washer Repair

I see there are many agitator drives here where the dogs have become brittle with age and broken. I have